A thermal transfer printhead uses heat energy to deposit ink onto the print media. The detailed working process is as follows:
1. When the sensor transmits a signal to the printhead, the thermistor layer is activated by electrical energy, generating heat.
2. This heat energy is transferred to the metal layer, which then transfers it to the protective layer and transition layer.
3. The transition layer transfers the heat energy to the print media, heating the ink on the media. This allows the thermal printing ink to adhere to the media through the pigment on the media surface, rather than through inkjet.
4. When the sensor cuts off the electrical signal, the thermistor layer stops generating heat, and the printhead cools down again.
In general, a thermal transfer printhead uses electrical control to release heat energy, transferring text, images, or any other graphic onto the media. Because this technology does not require the printhead to contact the media surface, it can also be used to print non-flat, three-dimensional objects.

