Thermal Printhead Structure

Jun 10, 2025

Leave a message

Thermal printers selectively heat specific locations on thermal paper, thereby producing a corresponding pattern. Heat is provided by a small electronic heater on the printhead, which is in contact with the heat-sensitive material. The heaters are arranged in a pattern of dots or strips, controlled by the printer's logic. When activated, they produce a pattern on the thermal paper corresponding to the heated elements. The same logic that controls the heated elements also controls the paper feed, allowing the pattern to be printed across the entire label or paper.

The most common thermal printer uses a fixed printhead with a heated dot matrix. The example printhead has 320 dots, each measuring 0.25 mm x 0.25 mm. This dot matrix allows the printer to place print dots anywhere on the thermal paper. This technology is used in both paper and label printers.

The paper feed speed of a thermal printer is typically rated at 13 mm/s. However, some printers can achieve speeds twice this when optimized for label formats. This type of thermal printer has a relatively simple process, allowing it to be manufactured into a portable, battery-powered thermal label printer. While thermal printers offer flexible printing formats, high image quality, high speed, and low cost, the barcode labels they print are not easily stored in environments above 60°C or exposed to ultraviolet light (such as direct sunlight) for extended periods. Therefore, thermal barcode labels are generally limited to indoor use.

715826069806087896

Send Inquiry